7 Chapter 2: Hardware Setup
3 Load drives in the drive trays.
For 3.5” drives: Place the drive in the drive tray. Then tighten the screws to secure the drive in place.
For 2.5” drives: Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down
and tighten the screws to secure the drive in place.
4 Insert the loaded drive tray into the empty hard drive bay.
Important: Make sure the drive tray is completely inserted. Otherwise, the drive might not function properly.
5 Repeat the steps above to install all prepared drives.
Kommentare zu diesen Handbüchern