
12
Chapter 2: Hardware Setup
b
Align the notch on the gold edge of the module with the notch in the memory slot.
c
Pushdownonthememorymodulewithrmandevenpressure.Theretainingclipswillsnapintopositionas
the module is correctly inserted.
Note:
Hold the memory module by its edges, and do not touch the gold connectors.
4
Replace the case and inner panel:
a
As you replace the inner panel, connect the cables you unplugged from the inner panel in step 2-c. Make
sure that the Drive Status Indicator connector from the A side should be plugged in the lower port, and that
from the B side in the upper one.
b
Replace the inner panel and tighten the 7 screws you removed in step 2-b.
c
Replace the top and side covers and tighten the 4 screws you removed in step 2-a.
Kommentare zu diesen Handbüchern